Performance Products for FWD
Chrysler, Dodge, Plymouth, Shelby
Sway Bar Bushings!
Home
How to Purchase?
Poly Engine Mounts
Poly Suspension Bushings
Poly "T" Bushings By Size
Anti-Sway Bars
Tech Help!
Bushing Lube
Contact Info
Tips To Make Your Car Handle
Links
These bushings are shipped with
our Special Green Poly Bushing Lube!
Front anti-sway bar bushings made of polyurethane
help your factory bar do it's job. You will need to
measure your bar before you order, as bars were
made in several sizes. Some performance models
had two bushing sizes on the same bar, the a-arm
area being smaller than the center of the sway bar.
Fits most all FWD Chrysler, Plymouth and Dodge
FWD cars from 1978 to 1989.
$28 Set of 4...plus $9 shipping
We will need to know your anti-sway bar size!

See photos below.
Made by PolyBushings.com
Anti-Sway Bar bushings for "cast arm" cars.
Front anti-sway bar bushings made of polyurethane.
Help your factory bar do it's job. You will need to
measure your bar before you order, as bars were
made in several sizes.
Fits most all FWD Chrysler, Plymouth and Dodge
FWD cars from 1990 to 1995.
$28 Set of 4...plus $9 shipping
Made by PolyBushings.com
Round bar bushings made by another mfg.
NOTICE!
Some late 80's FWD cars had a universal
style bracket welded in to where the factory
bushings went into the k-frame. Not sure if
it was because a shortage on factory style
bushing or what the reason was. To replace
these you will need a "universal" style "D"
bushing that fits the welded in bracket.
PolyBushings.com has the correct fitting
bushing, you just need to let us know if you
have this style. See below.
If you have this style they are $16 a pair
or with the set of all 4, they are $30 a set.
Set will do one car.

Made by PolyBushings.com
See photos below.

This is what the factory style k-frame looks like, where the bushing goes.

This is what the factory "D" style k-frame looks like, where the bushing goes.
.Contact Johnny at (541) 266-0890 or e-mail at glhs289@hotmail.com